Specialized Training
Adapted Courses to Our Clients NeedsOnline Version Also Available
Experience and Soundness:
We have trained over 1.500 professionals from all around the world companies.
Methodology:
“Aseptic Training” – complete brands-independence – aimed at Professionals with a practical and open mind. Comprehensive scope.
Instructors:
Consisting of qualified instructors with more than 35 years of hands-on experience and borne out by over 2.000 studies on troubleshooting assets.
On-going education:
After taking the seminar, you will have immediate access to our professionals that will be glad to help you with any consult you may need.
Courses Call Calendar
Event Type
All
Certified Seminars
Customized Seminars
Specialized Seminar
WEBINARS
march
202428febAll Day01marCBM (Condition Based Maintenance) For VesselsSeminar
Time
February 28 (Wednesday) - March 1 (Friday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives:Operation and Maintenance costs reduction, implementing from scratch and in no more than six (6) months a comprehensive CBM program or assessing the existing one. The following activities will be
Event Details
Objectives:Operation and Maintenance costs reduction, implementing from scratch and in no more than six (6) months a comprehensive CBM program or assessing the existing one. The following activities will be carried out: The following activities will be carried out:
- Mentoring and training in how to analyse and identify critical maintenance issues before typical failures occur by means of vibration measurement, analysis and control.
- Spectrum and vibration analysis training.
- Definition of the main stages of a CBM Project.
- Continuous Monitoring/Protection of vessels’ critical equipment.
Aimed at:Heads and Officers of the Navy, Operations Supervisors, Maintenance Managers, Systems Integrators, Companies and Engineers oriented to Condition-Based Maintenance -CBM- for ships for civil and military use. It is not essential to have prior knowledge of this methodology and its tools. No previous knowledge or experience is needed.
more
Organizer
202406marAll Day08Noise and vibration on board vessels Seminar.
Time
march 6 (Wednesday) - 8 (Friday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives:Design and construction of vessels according to the New Specifications and to the environmental directives for reducing vessels’ impact: Review of the current Normative/Standards and Regulation. Review of the basic concepts of
Event Details
Objectives:Design and construction of vessels according to the New Specifications and to the environmental directives for reducing vessels’ impact:
- Review of the current Normative/Standards and Regulation.
- Review of the basic concepts of Noise and Vibration on board vessels.
- Noise and Vibration problems on board vessels identification and solution. Review of the CBM (Condition Based Maintenance) techniques,
- as an essential methodology for cost reduction.
Aimed to:Shipyards’ technical staff, Maintenance technicians, sales department (definition and control of the specifications.), Provisioning responsible (Supplies control), Technical offices, Project engineers, Maintenance technicians, inspectors. No previous knowledge or experience is needed. No previous knowledge or experience is needed.
more
Organizer
202413marAll Day14Vibration in diesel engines and in gas turbines Seminar.
Time
march 13 (Wednesday) - 14 (Thursday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives:Operation and Maintenance costs reduction, implementing from scratch and in no more than six (6) months a comprehensive CBM program or assessing the existing one. The following activities will be
Event Details
Objectives:Operation and Maintenance costs reduction, implementing from scratch and in no more than six (6) months a comprehensive CBM program or assessing the existing one. The following activities will be carried out:
- Mentoring and training in how to analyse and identify critical maintenance issues before typical failures occur by means of vibration measurement, analysis and control. Spectrum and vibration analysis training.
- Definition of the main stages of a CBM Project. Turbo-compressor failures.
- Real Practical Cases of Diagnosis and Resolution. Attention to Fault Cases presented by attendees. Continuous Monitoring/Protection of vessels’ critical equipment.
- Identification and correction of complex failures.
Aimed at:Maintenance Technicians, Plant Managers, Engineering Department, Projects, Management, Department Managers, Quality Control; of Co-generation and Combined Cycle plants. It is not essential to have prior knowledge of this methodology and its tools. Have prior knowledge of this methodology and its tools. No previous knowledge or experience is needed. Have prior knowledge of this methodology and its tools.
more
Organizer
202420marAll Day21PdM and CBM for wind turbines Seminar
Time
march 20 (Wednesday) - 21 (Thursday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives:To Specialize in Root Cause Failure Analysis of this kind of facilities (both onshore and offshore installations): Mentoring and training in how to analyse and identify critical maintenance issues before typical
Event Details
Objectives:To Specialize in Root Cause Failure Analysis of this kind of facilities (both onshore and offshore installations):
- Mentoring and training in how to analyse and identify critical maintenance issues before typical wind turbines’ failures occur by means of vibration measurement, analysis and control.
- To identify the typical failures that can be found on Wind Turbines and their solution.
- Definition of the main stages of a PdM Project applied to Wind Farms.
- Continuous Monitoring/Protection of Wind Turbines.
Aimed to:Wind farms’ maintenance technicians, Operation Managers, Engineering departments, Project and Start-up engineers, paying special attention to offshore installations. No previous knowledge or experience is needed. No previous knowledge or experience is needed.
more
Organizer
Time
(Wednesday) 11:00 - 12:00
Event Details
📝 REGISTRATION LINK: HERE We announce our next webinar, a valuable opportunity for those looking to improve safety in their industrial facilities. In this session, we will focus on the
Event Details
📝 REGISTRATION LINK: HERE
We announce our next webinar, a valuable opportunity for those looking to improve safety in their industrial facilities. In this session, we will focus on the presentation of the most advanced flame and gas sensors in the industry, providing essential knowledge to strengthen protection in industrial plants. We cordially invite you to register and participate in this initiative that will contribute to the strengthening of safety measures in your industrial environment. Don’t miss the opportunity to stay updated on the latest innovations in this field.
AGENDA
- Meet Omniguard by Firefly.
- Application Sectors.
- Flame detector technologies, models and accessories.
- Gas detector technologies, models and accessories.
📅 Webinar Date: March 20, 2024
🕒 Time: 11:00h CET
📍 Platform: Google Meets
📝 REGISTRATION LINK: HERE.
We thank you for your attention and look forward to your presence.
Translated with DeepL.com (free version)
more
202425marAll Day27Predictive Maintenance Seminar -PdM
Time
march 25 (Monday) - 27 (Wednesday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives:To know how to implement, from scratch and in no more than six (6) months, a comprehensive Predictive Maintenance Program (PdMP) or to assess the existing one. Mentoring and training
Event Details
Objectives:To know how to implement, from scratch and in no more than six (6) months, a comprehensive Predictive Maintenance Program (PdMP) or to assess the existing one. Mentoring and training in how to analyse and identify critical maintenance issues before failures occur by means of vibration measurement, analysis and control. Spectrum and vibration analysis training. To manage all the stages of the PdM project. Introduction to Continuous Vibration Protection/Monitoring Development of the following activities.
- Mentoring and training in how to analyse and identify critical maintenance issues before typical failures occur by means of vibration measurement, analysis and control.
- Spectrum and vibration analysis training.
- To manage all the stages of the PdM project.
- Introduction to Continuous Vibration Protection/Monitoring
Aimed at: Maintenance technicians, Plant Managers, Engineering Departments, Project engineers, Department’s Managers, Quality Control. No previous knowledge or experience is needed. No previous knowledge or experience is needed.
more
Organizer
april
202410aprAll Day12Root cause cause failure seminar - CASE STUDIES
Time
april 10 (Wednesday) - 12 (Friday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives: he main objective of the seminar is to train attendees to implement predictive maintenance programs focus to: Reduce losses of unexpected plant shutdowns, to reduce maintenance costs, to minimize
Event Details
Objectives: he main objective of the seminar is to train attendees to implement predictive maintenance programs focus to: Reduce losses of unexpected plant shutdowns, to reduce maintenance costs, to minimize failures and / or unexpected breakdowns and to maintain high equipment reliability.
- Review of Basic Concepts of MPA.
- Introduction to “Breakdown Consulting”. Knowledge and “practical” Specialization in Fault Diagnosis Techniques: Variable Speed Tests, Modal Analysis, etc; and Correction Methods: Dynamic Balance: One and two planes; Reinforced structures, etc.
- Real Practical Cases of Diagnosis and Resolution. Attention to Fault Cases presented by attendees.
Aimed at: Maintenance technicians, Plant Managers, Engineering Departments, Project engineers, Department’s Managers, Quality Control. No previous knowledge or experience is needed. It is advisable to have prior knowledge of this methodology and its tools (TSI MPA Course).
more
Organizer
Time
15 (Monday) 09:00 - 19 (Friday) 14:00
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives: Vibration Analyst Category I Certification by training attendees in: Basic knowledges for checking the rotating machinery behavior using vibration analysis. Basic knowledges about: measurement chain, signal processing, analysis and diagnosis, reference standards.
Event Details
Objectives:
Vibration Analyst Category I Certification by training attendees in:
- Basic knowledges for checking the rotating machinery behavior using vibration analysis.
- Basic knowledges about: measurement chain, signal processing, analysis and diagnosis, reference standards. corrective actions and monitoring systems.
- Bonus training
Organizer
202422aprAll Day26Vibration Analyst Category II (ISO 18436-2)
Time
april 22 (Monday) - 26 (Friday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives:Vibration Analyst Category II Certification by training attendees in: Reaffirm theoretical and practical knowledges required for the Certification. Deepen signal processing, evaluation and diagnosis of machinery using vibration analysis. Detection and diagnosis of
Event Details
Objectives:Vibration Analyst Category II Certification by training attendees in:
- Reaffirm theoretical and practical knowledges required for the Certification.
- Deepen signal processing, evaluation and diagnosis of machinery using vibration analysis.
- Detection and diagnosis of the most common mechanical failures by measurements, analysis and control of vibrations.
Aimed to:Technicians and Heads of Predictive Maintenance and Reliability. At least, twelve (12) months of practical experience in vibration analysis.
more
Organizer
may
202406mayAll Day10Vibration Analyst Category III (ISO 18436-2)
Time
may 6 (Monday) - 10 (Friday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives:Vibration Analyst Category II Certification by training attendees in: Reaffirm theoretical and practical knowledges required for the Certification. Deepen signal processing, evaluation and diagnosis of machinery using vibration analysis. Detection and diagnosis of
Event Details
Objectives:Vibration Analyst Category II Certification by training attendees in:
- Reaffirm theoretical and practical knowledges required for the Certification.
- Deepen signal processing, evaluation and diagnosis of machinery using vibration analysis.
- Detection and diagnosis of the most common mechanical failures by measurements, analysis and control of vibrations.
Aimed to:Technicians and Heads of Predictive Maintenance and Reliability. At least, thirty-six (36) months of practical experience in vibration analysis.
more
Organizer
september
202404sepAll Day06CBM (Condition Based Maintenance) For VesselsSeminar
Time
september 4 (Wednesday) - 6 (Friday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives:Operation and Maintenance costs reduction, implementing from scratch and in no more than six (6) months a comprehensive CBM program or assessing the existing one. The following activities will be
Event Details
Objectives:Operation and Maintenance costs reduction, implementing from scratch and in no more than six (6) months a comprehensive CBM program or assessing the existing one. The following activities will be carried out: The following activities will be carried out:
- Mentoring and training in how to analyse and identify critical maintenance issues before typical failures occur by means of vibration measurement, analysis and control.
- Spectrum and vibration analysis training.
- Definition of the main stages of a CBM Project.
- Continuous Monitoring/Protection of vessels’ critical equipment.
Aimed at:Heads and Officers of the Navy, Operations Supervisors, Maintenance Managers, Systems Integrators, Companies and Engineers oriented to Condition-Based Maintenance -CBM- for ships for civil and military use. It is not essential to have prior knowledge of this methodology and its tools. No previous knowledge or experience is needed.
more
Organizer
202411sepAll Day12Vibration in diesel engines and in gas turbines Seminar.
Time
september 11 (Wednesday) - 12 (Thursday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives:Operation and Maintenance costs reduction, implementing from scratch and in no more than six (6) months a comprehensive CBM program or assessing the existing one. The following activities will be
Event Details
Objectives:Operation and Maintenance costs reduction, implementing from scratch and in no more than six (6) months a comprehensive CBM program or assessing the existing one. The following activities will be carried out:
- Mentoring and training in how to analyse and identify critical maintenance issues before typical failures occur by means of vibration measurement, analysis and control. Spectrum and vibration analysis training.
- Definition of the main stages of a CBM Project. Turbo-compressor failures.
- Real Practical Cases of Diagnosis and Resolution. Attention to Fault Cases presented by attendees. Continuous Monitoring/Protection of vessels’ critical equipment.
- Identification and correction of complex failures.
Aimed at:Maintenance Technicians, Plant Managers, Engineering Department, Projects, Management, Department Managers, Quality Control; of Co-generation and Combined Cycle plants. It is not essential to have prior knowledge of this methodology and its tools. Have prior knowledge of this methodology and its tools. No previous knowledge or experience is needed. Have prior knowledge of this methodology and its tools.
more
Organizer
202418sepAll Day19PdM and CBM for wind turbines Seminar
Time
september 18 (Wednesday) - 19 (Thursday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives:To Specialize in Root Cause Failure Analysis of this kind of facilities (both onshore and offshore installations): Mentoring and training in how to analyse and identify critical maintenance issues before typical
Event Details
Objectives:To Specialize in Root Cause Failure Analysis of this kind of facilities (both onshore and offshore installations):
- Mentoring and training in how to analyse and identify critical maintenance issues before typical wind turbines’ failures occur by means of vibration measurement, analysis and control.
- To identify the typical failures that can be found on Wind Turbines and their solution.
- Definition of the main stages of a PdM Project applied to Wind Farms.
- Continuous Monitoring/Protection of Wind Turbines.
Aimed to:Wind farms’ maintenance technicians, Operation Managers, Engineering departments, Project and Start-up engineers, paying special attention to offshore installations. No previous knowledge or experience is needed. No previous knowledge or experience is needed.
more
Organizer
202425sepAll Day27Predictive Maintenance Seminar -PdM
Time
september 25 (Wednesday) - 27 (Friday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives:To know how to implement, from scratch and in no more than six (6) months, a comprehensive Predictive Maintenance Program (PdMP) or to assess the existing one. Mentoring and training
Event Details
Objectives:To know how to implement, from scratch and in no more than six (6) months, a comprehensive Predictive Maintenance Program (PdMP) or to assess the existing one. Mentoring and training in how to analyse and identify critical maintenance issues before failures occur by means of vibration measurement, analysis and control. Spectrum and vibration analysis training. To manage all the stages of the PdM project. Introduction to Continuous Vibration Protection/Monitoring Development of the following activities.
- Mentoring and training in how to analyse and identify critical maintenance issues before typical failures occur by means of vibration measurement, analysis and control.
- Spectrum and vibration analysis training.
- To manage all the stages of the PdM project.
- Introduction to Continuous Vibration Protection/Monitoring
Aimed at: Maintenance technicians, Plant Managers, Engineering Departments, Project engineers, Department’s Managers, Quality Control. No previous knowledge or experience is needed. No previous knowledge or experience is needed.
more
Organizer
october
202402octAll Day04Noise and vibration on board vessels Seminar.
Time
october 2 (Wednesday) - 4 (Friday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives:Design and construction of vessels according to the New Specifications and to the environmental directives for reducing vessels’ impact: Review of the current Normative/Standards and Regulation. Review of the basic concepts of
Event Details
Objectives:Design and construction of vessels according to the New Specifications and to the environmental directives for reducing vessels’ impact:
- Review of the current Normative/Standards and Regulation.
- Review of the basic concepts of Noise and Vibration on board vessels.
- Noise and Vibration problems on board vessels identification and solution. Review of the CBM (Condition Based Maintenance) techniques,
- as an essential methodology for cost reduction.
Aimed to:Shipyards’ technical staff, Maintenance technicians, sales department (definition and control of the specifications.), Provisioning responsible (Supplies control), Technical offices, Project engineers, Maintenance technicians, inspectors. No previous knowledge or experience is needed. No previous knowledge or experience is needed.
more
Organizer
202416octAll Day18Root cause cause failure seminar - CASE STUDIES
Time
october 16 (Wednesday) - 18 (Friday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives: he main objective of the seminar is to train attendees to implement predictive maintenance programs focus to: Reduce losses of unexpected plant shutdowns, to reduce maintenance costs, to minimize
Event Details
Objectives: he main objective of the seminar is to train attendees to implement predictive maintenance programs focus to: Reduce losses of unexpected plant shutdowns, to reduce maintenance costs, to minimize failures and / or unexpected breakdowns and to maintain high equipment reliability.
- Review of Basic Concepts of MPA.
- Introduction to “Breakdown Consulting”. Knowledge and “practical” Specialization in Fault Diagnosis Techniques: Variable Speed Tests, Modal Analysis, etc; and Correction Methods: Dynamic Balance: One and two planes; Reinforced structures, etc.
- Real Practical Cases of Diagnosis and Resolution. Attention to Fault Cases presented by attendees.
Aimed at: Maintenance technicians, Plant Managers, Engineering Departments, Project engineers, Department’s Managers, Quality Control. No previous knowledge or experience is needed. It is advisable to have prior knowledge of this methodology and its tools (TSI MPA Course).
more
Organizer
Time
21 (Monday) 09:00 - 25 (Friday) 14:00
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives: Vibration Analyst Category I Certification by training attendees in: Basic knowledges for checking the rotating machinery behavior using vibration analysis. Basic knowledges about: measurement chain, signal processing, analysis and diagnosis, reference standards.
Event Details
Objectives:
Vibration Analyst Category I Certification by training attendees in:
- Basic knowledges for checking the rotating machinery behavior using vibration analysis.
- Basic knowledges about: measurement chain, signal processing, analysis and diagnosis, reference standards. corrective actions and monitoring systems.
- Bonus training
Organizer
november
202411novAll Day15Vibration Analyst Category II (ISO 18436-2)
Time
november 11 (Monday) - 15 (Friday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives:Vibration Analyst Category II Certification by training attendees in: Reaffirm theoretical and practical knowledges required for the Certification. Deepen signal processing, evaluation and diagnosis of machinery using vibration analysis. Detection and diagnosis of
Event Details
Objectives:Vibration Analyst Category II Certification by training attendees in:
- Reaffirm theoretical and practical knowledges required for the Certification.
- Deepen signal processing, evaluation and diagnosis of machinery using vibration analysis.
- Detection and diagnosis of the most common mechanical failures by measurements, analysis and control of vibrations.
Aimed to:Technicians and Heads of Predictive Maintenance and Reliability. At least, twelve (12) months of practical experience in vibration analysis.
more
Organizer
202418novAll Day22Vibration Analyst Category III (ISO 18436-2)
Time
november 18 (Monday) - 22 (Friday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives:Vibration Analyst Category II Certification by training attendees in: Reaffirm theoretical and practical knowledges required for the Certification. Deepen signal processing, evaluation and diagnosis of machinery using vibration analysis. Detection and diagnosis of
Event Details
Objectives:Vibration Analyst Category II Certification by training attendees in:
- Reaffirm theoretical and practical knowledges required for the Certification.
- Deepen signal processing, evaluation and diagnosis of machinery using vibration analysis.
- Detection and diagnosis of the most common mechanical failures by measurements, analysis and control of vibrations.
Aimed to:Technicians and Heads of Predictive Maintenance and Reliability. At least, thirty-six (36) months of practical experience in vibration analysis.
more
Organizer
202425novAll Day27Failure Diagnosis in pumps Seminar.
Time
november 25 (Monday) - 27 (Wednesday)
Location
TSI, TÉCNICAS Y SERVICIOS DE INGENIERÍA S.L.
Event Details
Objectives: Knowledge and expertise in the failure diagnosis techniques in pumps: Main failures. Applicable Standards. Variable speed test. Modal Analysis. Reinforced studies. Torsional analysis. Identification and correction of complex failures. Aimed to:The following departments: Maintenance and reliability. Diagnosis. Engineering. Projects. Quality control.
Event Details
Objectives: Knowledge and expertise in the failure diagnosis techniques in pumps:
- Main failures.
- Applicable Standards.
- Variable speed test.
- Modal Analysis.
- Reinforced studies.
- Torsional analysis.
- Identification and correction of complex failures.
Aimed to:The following departments:
- Maintenance and reliability.
- Diagnosis.
- Engineering.
- Projects.
- Quality control.